Early Black Friday in cart discounts!
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Free shipping on all projectors. Tax-exempt purchasing available in your cart.

Chief Truss Adapter 1.5 In

SKU: CMA-365
Regular price $73.00

Frequently Asked Questions

Ceiling mounts are hardware systems used to suspend equipment such as projectors, displays, lighting, speakers, or cameras from an overhead structure. A truss ceiling adapter is needed when the mounting point is not a flat structural ceiling, but a truss, beam, or rigging pipe instead. That is common in event venues, churches, auditoriums, gyms, trade show booths, and staging environments. The Chief CMA-365 is specifically designed for that use case. It adapts a standard 1-1/2 inch threaded extension column to square, round, rectangular, or I-beam truss up to 3 inches in diameter. That makes it useful when a standard ceiling plate will not attach directly to the structure above. This type of adapter is best for installers who need flexible drop length and secure attachment to exposed rigging. It is less relevant for basic drywall or wood-joist ceiling installs, where a traditional ceiling plate is usually the better choice. If your equipment needs to hang from a truss rather than a flat ceiling, a truss adapter is the right category to consider.
The usual method is to clamp or adapt the equipment mount to the truss, then connect it to a threaded extension column or pipe. For many AV and staging setups, the goal is to create a secure overhead attachment point without drilling into the truss itself. A truss ceiling adapter solves that by wrapping or fastening to the truss and providing a standard threaded connection below. The Chief CMA-365 is built for this purpose. It accepts standard NPT 1-1/2 inch pipe threaded on both ends, so installers can choose the column length needed for proper projector or display height. It is compatible with square, round, rectangular, and I-beam truss shapes up to 3 inches in diameter. This approach works well for projectors, video displays, and lighting in commercial or event environments where drop distance matters. The key tradeoff is that you still need compatible pipe, mount components, and proper load planning. For safety, the full assembly should always be reviewed for structural suitability and installed according to the equipment and building requirements.
The weight a ceiling mount can hold depends on the entire mounting system, not just one part. Load capacity is affected by the structure above, the adapter, the extension column, the projector or display mount, the fasteners, and how the weight is distributed. In truss applications, the truss itself must also be rated for the intended load. For that reason, shoppers should not estimate capacity based only on appearance or product type. A truss adapter like the Chief CMA-365 is designed to create a secure connection between a truss up to 3 inches in diameter and a 1-1/2 inch threaded extension column, but the safe working load must be confirmed from the official specifications and the rest of the hardware in the assembly. This is especially important for heavier projectors, large displays, or installations above people. The best users for this product are professional integrators, facilities teams, and venue installers who can match all components correctly. If you need a mount for a heavier large venue projector or suspended display, verify the adapter, pipe, mount head, and structure as one system before buying.
A flush mount keeps equipment close to the ceiling with little or no drop, while a ceiling mount is a broader category that can include flush, fixed drop, or adjustable drop installations. The right choice depends on your ceiling type, sightlines, and how much clearance you need for the equipment. A flush mount is often best when the ceiling is flat and low enough that the projector or display can sit close to the structure. A truss adapter like the Chief CMA-365 is different because it is meant for suspended rigging and beam applications, where the installer needs to attach to a truss and often use a threaded extension column to set the proper height. That makes the CMA-365 a better fit for exposed truss ceilings, event production, houses of worship, and commercial spaces with overhead beam structures. The tradeoff is that it is not a simple low-profile ceiling plate for standard residential ceilings. If your priority is minimum drop, a flush setup may be better. If your priority is truss compatibility and adjustable height, a truss ceiling adapter is usually the stronger choice.
Yes, a truss ceiling adapter can be used for a projector or display installation if the rest of the mounting system is compatible. Its job is to create the overhead attachment point on the truss, not to connect directly to the projector or TV by itself. You would typically pair it with a 1-1/2 inch threaded extension column and then the appropriate projector mount or display mount below. The Chief CMA-365 is well suited for projector installations and suspended video setups because it connects to square, round, rectangular, or I-beam truss up to 3 inches in diameter and accepts standard NPT 1-1/2 inch pipe threaded on both ends. That gives installers flexibility to set the right drop length for image alignment or viewing height. This is most useful in commercial AV, live events, education, worship spaces, and other buildings with exposed truss structures. The main limitation is that it is not a complete mount on its own. Buyers still need to confirm compatibility with the projector mount or display bracket and ensure the full assembly is rated appropriately.
The Chief CMA-365 is designed to fit several common overhead support shapes, including square, round, rectangular, and I-beam truss. It supports truss members up to 3 inches in diameter or comparable dimension, which makes it versatile for many commercial and staging environments. That broad compatibility matters because exposed ceiling structures are not all the same. Some venues use round pipe truss, others use square or rectangular framing, and some permanent installations involve I-beams. A more limited adapter may only fit one shape, but this model is intended to handle multiple truss profiles without forcing the installer into a single rigging style. It is best for users who need flexibility across different job sites, such as AV integrators, event teams, and facilities staff. The key limitation is size. If your truss or beam exceeds 3 inches, you should confirm fit before ordering and consider a different solution if needed. Measuring the actual structural member first is the simplest way to avoid installation issues.
A 1-1/2 inch threaded extension column system is a common choice when you need adjustable drop length, strong support, and compatibility with professional AV mounting components. Instead of relying on a fixed-height plate, the installer can select a pipe length that positions the projector or display exactly where it needs to be for image alignment, clearance, or sightlines. The Chief CMA-365 is built around that approach. It accepts any length of standard NPT 1-1/2 inch pipe threaded on both ends, which gives you flexibility in both temporary and permanent installations. This is especially useful in rooms with high ceilings, open truss architecture, or staging environments where the mounting height often changes from one setup to another. The main benefit is customization. The tradeoff is that the adapter is only one part of the system, so you still need the correct pipe and mount components. This style is best for professional projector and display installations where height control matters more than having the lowest-profile mount possible.
Yes, it is a practical option for event production and temporary rigging setups where you need to mount equipment from a truss quickly and securely. Its design supports several truss shapes, including square, round, rectangular, and I-beam, up to 3 inches in diameter, which helps when working across different venues and staging systems. Another reason it fits event use is its compatibility with standard 1-1/2 inch NPT threaded pipe. That allows crews to choose the needed drop length based on the room, stage design, or projection angle. For mobile teams, that flexibility can simplify planning because the same adapter can be used with different column lengths as setups change. It is most useful for AV technicians, production companies, houses of worship, and rental environments where installations may be reconfigured often. The tradeoff is that it still requires proper rigging practice and matching components. It is not a one-piece complete mount, so buyers should plan for the extension column and the device-specific mount below.
A truss ceiling adapter is better when the overhead mounting surface is an exposed truss, beam, or rigging structure rather than a flat structural ceiling. Standard ceiling plates are typically meant to fasten to wood, concrete, or a finished ceiling structure. They are not ideal when there is no flat mounting surface or when drilling into the structure is not appropriate. The Chief CMA-365 is made for those situations. It attaches to square, round, rectangular, or I-beam truss up to 3 inches and then provides a connection point for a 1-1/2 inch threaded extension column. That makes it a better solution for open-ceiling commercial spaces, performance venues, school auditoriums, churches, and trade show environments. Choose this type of adapter when your main challenge is the ceiling structure itself. Choose a standard ceiling plate when you have a conventional overhead surface and do not need truss compatibility. The decision is less about the projector or display and more about what you are mounting to above.
The Chief CMA-365 is best suited for professional installers and organizations that need to suspend projectors, displays, or similar AV equipment from truss or beam structures. It is especially useful in commercial AV, education, worship spaces, event production, staging, and any facility with exposed overhead framing instead of a conventional finished ceiling. Its main strengths are versatility and height flexibility. It fits square, round, rectangular, and I-beam truss up to 3 inches in diameter and works with standard NPT 1-1/2 inch pipe threaded on both ends. That means installers can adapt the drop length to the room and the equipment rather than being locked into one fixed configuration. It may be less suitable for a simple home setup where the projector mounts directly to a standard ceiling joist and no truss is involved. In that case, a basic ceiling plate or flush mount may be easier. If your installation needs to bridge from truss to a threaded extension column, though, this adapter is the right kind of hardware to consider.

The Chief CMA-365 Truss Ceiling Adapter is a ceiling mounting accessory that secures a 1-1/2 inch threaded extension column to square, round, rectangular, or I-beam trusses up to 3 inches in diameter. It is designed for AV mounting, lighting support, and display rigging where stable attachment and adjustable drop length are required.

  • Fits square, round, rectangular, and I-beam trusses up to 3 inches in diameter
  • Accepts standard 1-1/2 inch NPT pipe threaded on both ends
  • Supports flexible height adjustment by using the extension column length you need
  • Suitable for projector mounts, flat panel display mounts, lighting fixtures, and staging equipment
  • Provides a secure truss attachment for temporary event setups or permanent commercial installations

Compared to fixed mounting points, this truss adapter gives installers more flexibility when working around ceiling structures, stage truss, or exposed beam layouts. Unlike improvised clamps, it is purpose-built to interface with standard 1-1/2 inch NPT threaded pipe commonly used in professional AV installations.

The design supports quick setup and reliable positioning in environments such as houses of worship, auditoriums, trade show booths, live event production, and retail display installations. For integrators and technicians who need a dependable way to mount equipment from truss, the CMA-365 offers a practical fit with standard extension hardware and a wide range of truss shapes.

Customer reviews

Poor
Good

Max 4096 symbols

Accepts .jpg, .png and .webp (10Mb max size)

Be the first to write a review

No reviews yet

No reviews match the selected filter.

Customer reviews

Poor
Good

Max 4096 symbols

Accepts .jpg, .png and .webp (10Mb max size)

Be the first to write a review

No reviews yet

No reviews match the selected filter.