Early Black Friday in cart discounts!
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Free shipping on all projectors. Tax-exempt purchasing available in your cart.

AVPro Edge 10G SFP+ Single-Mode Fiber Optical Transceiver Module

SKU: AC-10G-SFPP-SM
Regular price $133.00

Frequently Asked Questions

A fiber optic transceiver sends and receives data over fiber cable by converting electrical signals from a switch, encoder, or network device into optical signals, then converting incoming light back into data. In practical terms, it is the small plug-in module that lets compatible hardware communicate over fiber instead of copper cabling. This matters when you need longer cable runs, higher bandwidth, or better resistance to electrical interference. The AVPro Edge 10G SFP+ Single-Mode Fiber Optical Transceiver Module is designed for 10G connections and works with MXnet 10G TCVRs, CBOX, and compatible network switches. It uses single-mode fiber, a 1310 nm wavelength, and a duplex LC connector, with support for distances from 2 meters up to 10 kilometers. This type of transceiver is best for professional AV and network installations that need reliable high-speed transport over distance. The main tradeoff is compatibility: the transceiver, fiber type, connector type, and port format all need to match the equipment and the cable plant.
A transceiver is the general device category, while SFP+ refers to the form factor used by certain transceivers. In other words, an SFP+ module is a type of transceiver designed for Small Form-factor Pluggable Plus ports, commonly used for 10 Gigabit connections. For shoppers, the key point is that not every transceiver fits every port. You need to match the physical format and speed of the device port with the module. This product is an SFP+ optical transceiver, so it is intended for equipment with SFP+ slots and 10G data requirements. It supports a maximum data rate of 10.3125 Gbps and follows standards including IEEE 802.3ae and SFP+ MSA. This distinction helps buyers avoid a common mistake: choosing a fiber module based only on cable type without checking the port type. If your switch, AV-over-IP endpoint, or network hardware specifically calls for an SFP+ module for single-mode fiber, this is the category you should be considering.
The main types of fiber optic transceivers are typically grouped by form factor, fiber type, speed, connector style, and transmission distance. Common form factors include SFP and SFP+. Common fiber types are single-mode and multimode. Buyers also need to match wavelength, connector type, and supported protocols. A simple way to choose is to check five things: the port on your hardware, the required data speed, whether your cable is single-mode or multimode, the distance of the run, and the connector type. This AVPro Edge module is an SFP+ transceiver for single-mode fiber, uses duplex LC connectors, operates at 1310 nm, and supports 10G links up to 10 kilometers. That makes it a strong fit for professional installations where long-distance, high-bandwidth links are needed between compatible AVPro Edge devices and switches. It is not the right choice for multimode fiber systems or for devices that use non-SFP+ ports. Matching the module to the infrastructure is what determines performance and reliability.
You need a single-mode transceiver if your system uses single-mode fiber for longer runs and tighter signal control, and you need a multimode transceiver if your existing infrastructure is multimode fiber for shorter-distance links. The transceiver must match the fiber type already installed or planned. This product is a single-mode SFP+ transceiver, so it is designed for SMF cable and supports cable distances from 2 meters to 10 kilometers. That makes it suitable for enterprise AV, network distribution, and structured cabling projects where endpoints may be far apart. It uses a 1310 nm wavelength and duplex LC connectors, both common in single-mode deployments. Single-mode is usually the better choice for long-distance installations and future-ready backbone links. Multimode can be more practical for shorter in-building runs where that cable type is already in place. The main limitation is simple but important: a single-mode transceiver should not be mixed with multimode fiber if you want predictable performance and compatibility.
Use a 10G SFP+ fiber transceiver when you need high bandwidth over longer distances, cleaner signal transport in electrically noisy environments, or compatibility with fiber-based AV and network infrastructure. Fiber is often the better choice for backbone links, inter-rack connections, and professional AV-over-IP systems. This AVPro Edge module supports up to 10.3125 Gbps and single-mode fiber runs up to 10 kilometers, which goes far beyond typical short copper connections. It is especially useful in larger facilities, campus environments, and distributed AV systems where endpoints are separated by long pathways. Fiber also helps reduce issues related to electromagnetic interference. Copper can still make sense for short runs, lower cost installs, or when devices only support copper ports. The tradeoff with fiber is that you must match the transceiver to the port, fiber type, connector, and wavelength. For 10G professional installations that already use or require single-mode fiber, an SFP+ optical module is often the right fit.
Fiber optic technology is not obsolete. It remains one of the most important choices for high-bandwidth, long-distance, and low-interference data transport in both networking and professional AV. In many environments, fiber is the preferred medium because it supports faster backbone speeds and longer cable runs than typical copper options. For AV-over-IP and infrastructure projects, fiber is especially useful when signals need to move between rooms, floors, buildings, or equipment racks without performance loss from electrical noise. This AVPro Edge 10G SFP+ module is built for that kind of use, supporting single-mode fiber links from 2 meters to 10 kilometers and a maximum data rate of 10.3125 Gbps. Fiber is not always necessary for every installation. Short, simple, local connections may still work well on copper. But for scalable systems, longer distances, and professional network transport, fiber remains a smart and current technology choice. The key is selecting the correct transceiver type for the hardware and fiber infrastructure you are using.
Before buying a fiber optic transceiver, check port type, supported speed, fiber type, connector style, transmission distance, wavelength, and interoperability with your specific hardware. These details determine whether the module will work correctly in your AV-over-IP or network environment. For example, this model is an SFP+ module, not a standard SFP, and it is designed for 10G applications. It uses single-mode fiber, duplex LC connectors, a 1310 nm wavelength, and supports distances up to 10 kilometers. It is intended for AVPro Edge MXnet 10G TCVRs, CBOX, and compatible network switches, and it has been tested for interoperability with AVPro Edge switches. This checklist is most helpful for installers, IT teams, and buyers sourcing parts for structured AV systems. The most common mistake is focusing on only one spec, such as distance, while overlooking connector or port format. A transceiver only performs as expected when every part of the chain matches.
Yes, this transceiver is designed for use with AVPro Edge MXnet 10G TCVRs, CBOX, and compatible network switches that accept SFP+ optical modules. It is built specifically for 10G single-mode fiber connectivity in those environments and has been rigorously tested for interoperability with AVPro Edge switches. From a technical standpoint, it is MSA compliant and supports standards and protocols including IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA, CPRI, and eCPRI. It uses a duplex LC connector and single-mode fiber media, with a maximum cable distance of 10 kilometers. This is a good fit for buyers building or expanding professional AV-over-IP infrastructure who want a module aligned with AVPro Edge hardware requirements. The main limitation is that compatibility still depends on the receiving hardware supporting SFP+ optics, single-mode fiber, and the correct link specifications. It is always wise to confirm port requirements before purchase.
This single-mode SFP+ transceiver supports cable lengths from 2 meters up to 10 kilometers, with a maximum data rate of 10.3125 Gbps. That combination makes it suitable for both short equipment-room links and long-distance building or campus runs, as long as the system is using compatible single-mode fiber. The module operates at 1310 nm and uses a DFB transmitter with duplex LC connectivity, which are common specifications for stable 10G single-mode optical links. In practical terms, it is intended for high-speed professional AV and network transport where maintaining bandwidth over distance is important. This range is especially useful for integrators and IT teams who need flexibility across different installation sizes. The main tradeoff is that distance capability depends on using the correct fiber type and maintaining proper link quality across the cabling path. If your project uses multimode fiber or non-LC termination, you would need a different transceiver category.
A hot-swappable SFP+ transceiver can be inserted or removed without powering down the host device, which simplifies maintenance, upgrades, and troubleshooting in active systems. In professional AV and network environments, that can reduce downtime and make service work more efficient. This AVPro Edge module is hot-swappable and also designed for low power consumption, under 1 watt, with high-density integration for network stacking. It has an MTBF rating of 5 million hours, which indicates strong long-term reliability for continuous-use installations. Those traits are valuable in racks, equipment rooms, and distributed AV systems where uptime matters. This feature benefits installers, service teams, and organizations managing scalable AV-over-IP or network infrastructure. The practical limitation is that hot-swappability does not replace the need for compatibility planning. The device port, transceiver format, fiber type, and network design still need to be matched correctly to ensure stable operation.
The AVPro Edge 10G SFP+ Single-Mode Optical Transceiver Module enables robust connectivity for MXnet 10G TCVRs, CBOX, and network switches. Designed for high-speed performance, this hot-swappable module supports single-mode fiber connections at lengths between 2 meters and 10 kilometers. It is fully MSA compliant and features an MTBF rating of 5 million hours for reliable long-term use. The module offers low power consumption and high-density integration for efficient network stacking. Rigorous testing ensures complete interoperability with all AVPro Edge switches.

Form Factor SFP+
Wavelength 1310nm
Connector Duplex LC
Transmitter Type DFB
Max Data Rate 10.3125Gbps
Max Cable Distance 10km
Media SMF (Single-Mode Fiber)
Power Consumption <1W
Protocols IEEE 802.3ae, SFF-8472, SFF-8431, SFF-8432, SFP+ MSA Compliant, CPRI, eCPRI
Operating Temperature 0 to 70°C (32 to 158°F)

Customer reviews

Poor
Good

Max 4096 symbols

Accepts .jpg, .png and .webp (10Mb max size)

Be the first to write a review

No reviews yet

No reviews match the selected filter.

Customer reviews

Poor
Good

Max 4096 symbols

Accepts .jpg, .png and .webp (10Mb max size)

Be the first to write a review

No reviews yet

No reviews match the selected filter.