Early Black Friday in cart discounts!
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Free shipping on all projectors. Tax-exempt purchasing available in your cart.

Atlona ECHO-RX2 ECHO HDBT Receiver

SKU: ECHO-RX2
Regular price $392.98

Frequently Asked Questions

An HDBaseT extender is a device pair that sends HDMI video, audio, and control signals over a single category cable instead of a short HDMI cable. It is commonly used when the source and display are too far apart for a reliable direct HDMI connection, such as in classrooms, conference rooms, lecture halls, training spaces, and digital signage installations. The Atlona ECHO-RX2 is the receiver side of that setup. It is designed to work with a compatible sender to extend HDMI 2.0 content up to 230 feet at 4K UHD 60Hz 4:4:4, or up to 328 feet at 1080p, over CAT5e or CAT6. It also carries control signals like RS-232 and bi-directional IR, which is useful when displays and source equipment are installed in different locations. An HDBaseT extender is a good fit for B2B, education, and government environments that need cleaner cable runs, longer transmission distances, and dependable installed AV performance.
For many commercial AV installations, yes. HDBaseT is usually the better choice when you need to send high-resolution video farther than standard HDMI can do reliably, especially through walls, ceilings, or equipment racks. A long HDMI cable can work in short-to-medium runs, but signal stability, cable bulk, and installation flexibility become bigger concerns as distance increases. The ECHO-RX2 supports 4K UHD at 60Hz 4:4:4 up to 230 feet and 1080p up to 328 feet over a single CAT5e or CAT6 cable when paired with a compatible transmitter. That makes it practical for classrooms, boardrooms, and distributed AV systems where source devices are located away from displays. It also supports HDCP 2.2, HDR10, RS-232 pass-through, and wide-band bi-directional IR, which gives it more functionality than a simple cable run. The tradeoff is that HDBaseT requires compatible transmitter and receiver hardware, so it is best for structured installations rather than quick temporary setups.
An HDMI repeater boosts or refreshes an HDMI signal, but it still relies on HDMI cabling and is mainly used to stretch distance in a limited way. An HDBaseT extender receiver is part of a transmitter-receiver system that converts the signal for transport over category cable, allowing much longer runs and often adding control and audio features. The Atlona ECHO-RX2 is an HDBaseT extender receiver, so it does more than simply regenerate HDMI. It can receive HDMI 2.0 signals over CAT5e or CAT6 from a compatible sender, support 4K 60Hz 4:4:4 up to 230 feet, and output to two HDMI displays at the receiver location. It also offers analog audio de-embedding, RS-232 pass-through, bi-directional IR, EDID management, and Power over Cable support. If you only need a small distance boost, a repeater may be enough. If you need longer transmission, structured cabling, dual display output, or control integration, an HDBaseT receiver like the ECHO-RX2 is the more capable solution.
Yes, HDBaseT is widely used in professional AV because it is designed for stable signal extension over standard category cable in permanent installations. It is especially reliable in environments like classrooms, meeting spaces, command rooms, and training facilities where AV equipment must operate consistently and be easy to manage. The ECHO-RX2 is built for that type of use. It supports 4K UHD 60Hz 4:4:4, HDCP 2.2, HDR10, and 3D, which helps it handle modern source content without format issues. It also includes RS-232 pass-through and wide-band bi-directional IR for remote control, which is important when equipment is mounted in racks or other secure locations. Power over Cable can simplify installation by allowing the receiver to be powered from a compatible sender. Reliability still depends on correct system design. Using proper CAT5e or CAT6 cable, maintaining distance limits, and pairing it with a compatible HDBaseT sender are all important for best results.
The Atlona ECHO-RX2 supports up to 230 feet, or 70 meters, for 4K UHD at 60Hz with 4:4:4 chroma sampling. For 1080p video, it supports up to 328 feet, or 100 meters, over a single CAT5e or CAT6 cable when used with a compatible HDBaseT transmitter. Those distances make it well suited for larger classrooms, conference rooms, divisible spaces, and central equipment room designs where source devices are not located near the displays. The 4K 60Hz 4:4:4 capability is particularly important for detailed computer content, spreadsheets, and presentation graphics, where text clarity matters more than it would for basic video playback alone. The main limitation is that the maximum distance depends on signal format and proper infrastructure. Higher bandwidth formats like 4K 60Hz require more from the cabling path than 1080p. For best performance, installers should use quality CAT5e or CAT6 cable and avoid exceeding the published distance limits.
Yes. The ECHO-RX2 has dual HDMI outputs, allowing it to feed two displays simultaneously from a single received HDBaseT signal. This is one of its most useful features for rooms that need mirrored content on multiple screens without requiring a separate external splitter at the display end. That makes it a strong fit for lecture halls, training rooms, boardrooms, and overflow viewing areas where presenters want the same image shown on two displays or flat panels at the same time. Because the splitter is built into the receiver, installation can be cleaner and simpler than using additional hardware. Buyers should keep in mind that this is intended for duplicating the same source on both displays, not for creating two independent outputs with different content. It is best for applications where synchronized presentation, signage, or instructional material needs to appear in more than one place from a single AV source.
Yes. The Atlona ECHO-RX2 supports 4K UHD at 60Hz with 4:4:4 chroma sampling, along with HDR10, HDCP 2.2, and HDCP 1.4. That means it is compatible with many modern source devices and protected content formats commonly used in professional AV systems. This matters most in environments that display high-detail computer content, streaming media players, digital signage sources, or other UHD video systems. Support for 4:4:4 is especially helpful when image sharpness and text readability are important, such as in presentation rooms, higher education spaces, and control environments. HDR10 support also helps preserve compatible high dynamic range content where the rest of the signal chain supports it. The practical limitation is that the complete system must match the format requirements. To get full 4K 60Hz 4:4:4 and protected-content compatibility, the transmitter, cabling, source, and display devices all need to support the required standards.
The ECHO-RX2 can be powered over the cable from a compatible sender using Power over Cable, so a local power adapter at the receiver is not always required. This can simplify installation and reduce the need for a power outlet behind a display or in another hard-to-reach location. That is especially useful in clean commercial installs where the receiver is mounted behind a flat panel, near a projector, or in a space where minimizing visible cabling matters. The unit also includes a locking power connector, which adds security if a local power supply is used and helps prevent accidental disconnection. The key consideration is compatibility. Power over Cable only works when the connected transmitter supports that feature and is configured appropriately. If the sender does not provide power, the receiver will need local power. For permanent AV systems, many integrators value this flexibility because it supports a wider range of room designs and installation constraints.
The ECHO-RX2 includes de-embedded analog audio extraction, RS-232 pass-through, and wide-band bi-directional IR extension. In practical terms, that means it can do more than deliver video to a display. It can also help route audio separately and support remote control of connected equipment. The analog audio extraction is useful when a display is not the final audio destination, such as when sound needs to be sent to a local amplifier, DSP, or external speaker system. The RS-232 and bi-directional IR functions are valuable for integrated AV control, allowing technicians or room control systems to send commands between source and display locations. These features make the receiver a good fit for more advanced classrooms, boardrooms, and presentation spaces where centralized equipment, local amplification, and remote device control are part of the system design. Buyers who only need basic video extension may not use every feature, but integrators often value the added flexibility.
The Atlona ECHO-RX2 is best suited for professional AV installations that need high-bandwidth 4K extension, dual display output, and integrated control or audio features. It is a strong choice for universities, corporate meeting spaces, government facilities, training rooms, and digital signage applications where system reliability and installation flexibility matter. Compared with a simpler extender, this receiver stands out when you need 4K 60Hz 4:4:4 performance, two HDMI outputs at the receiver, analog audio de-embedding, RS-232, IR, EDID management, and Power over Cable support. Those features are useful in managed spaces where displays are mounted away from sources and where control integration is part of the project. A simpler extender may be enough for basic point-to-point video transport to one display without audio breakout or control needs. The ECHO-RX2 is the better fit when the project calls for a more complete AV infrastructure rather than just extending HDMI from point A to point B.

The Atlona ECHO-RX2 is an advanced HDBaseT receiver designed to extend high-resolution HDMI 2.0 signals across long distances using a single CAT5e or CAT6 cable. It supports pristine video resolutions up to 4K UHD at 60Hz 4:4:4 up to 230 ft (70 m) and 1080p up to 328 ft (100 m), fully compliant with HDCP 2.2, HDCP 1.4, and HDR10 content formats.

Equipped with a built-in HDMI splitter, this receiver provides dual HDMI outputs for direct connection to two secondary displays simultaneously. It features dedicated de-embedded analog audio extraction, making it easy to route multi-channel audio to separate sound systems or local amplification equipment.

Comprehensive control routing is built in, including RS-232 pass-through and wide-band bi-directional IR extension for remote device management. With Power over Cable (PoC) functionality, the unit can be powered directly over the network cable from a compatible transmitter, while a locking power connector ensures stable physical connectivity.

Key Features

Brand Atlona
Model ECHO-RX2
Product Type HDBaseT Extender Receiver
Max Resolution 4K@60Hz 4:4:4
Max Distance (4K) 230 ft (70 m)
Max Distance (1080p) 328 ft (100 m)
HDCP Compliance HDCP 2.2, 1.4
High Dynamic Range (HDR) HDR10
3D Support Yes
Outputs Dual HDMI
Audio De-embedded Analog Audio Extraction
Control Signals RS-232 Pass-Through & Control, Bi-directional IR (Wide Band)
EDID EDID Management
Power Features Power over Cable (PoC), Locking Power Supply Connector
UPC 846352005955
Weight 0.9 lb

Highlights

  • HDBaseT Extender
  • Extend UHD 4K@60Hz 4:4:4 up to 70m & 1080p up to 100m
  • HDCP 2.2, HDR10, 3D Support
  • RS-232 Pass-Through & Control
  • Bi-directional IR (Wide Band)
  • HDMI loop output on the Sender
  • Dual HDMI output on the Receiver
  • Audio Extraction on the Sender and Receiver
  • EDID management
  • Power over Cable (only Sender side needs power supply)
  • Locking Power Supply Connector

Frequently asked questions

What maximum transmission distance does the ECHO-RX2 support?

The ECHO-RX2 supports transmission distances up to 230 ft (70 m) for 4K UHD @ 60Hz 4:4:4 signals and up to 328 ft (100 m) for 1080p video over a single CAT5e or CAT6 cable.

Can the receiver connect to more than one display?

Yes, the receiver features an integrated splitter providing dual HDMI outputs to simultaneously connect two displays.

Does the receiver require a dedicated local power adapter?

No local power supply is strictly required when powered via Power over Cable (PoC) from a compatible sender, though the receiver also includes a locking power connector for flexible installation.

What control options and audio features are supported?

The unit supports RS-232 pass-through, wide-band bi-directional IR control, and de-embedded analog audio extraction.

Customer reviews

Poor
Good

Max 4096 symbols

Accepts .jpg, .png and .webp (10Mb max size)

Be the first to write a review

No reviews yet

No reviews match the selected filter.

Customer reviews

Poor
Good

Max 4096 symbols

Accepts .jpg, .png and .webp (10Mb max size)

Be the first to write a review

No reviews yet

No reviews match the selected filter.