Early Black Friday in cart discounts!
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Free shipping on all projectors. Tax-exempt purchasing available in your cart.

Atlona AT-OME-TX11-WP 4K HDMI HDBaseT Wallplate Transmitter with Trims

SKU: AT-OME-TX11-WP
Regular price $429.00

Frequently Asked Questions

HDBaseT is a technology that sends HDMI video, audio, control, and sometimes power over a single category cable such as Cat5e or Cat6. It is commonly used when you need to extend an AV signal farther than a standard HDMI cable can reliably reach, especially in conference rooms, classrooms, training spaces, and other commercial installations. A wallplate transmitter like the Atlona AT-OME-TX11-WP is a good fit when you want a clean in-wall connection point for a laptop or other HDMI source while sending the signal up to 330 feet to a compatible HDBaseT receiver or display system. It supports 4K/UHD at 60 Hz in 4:2:0 and HDCP 2.2 for protected content. HDBaseT is most useful for permanent installations where reliability, longer distance, and tidy cable management matter more than simple plug-and-play desktop use. If you only need a very short cable run at a desk or home TV setup, a direct HDMI cable may be simpler.
For long-distance installations, HDBaseT is usually the better choice. Standard HDMI works well over short runs, but signal reliability can become a problem as cable length increases. HDBaseT solves that by carrying the signal over a single Cat5e or Cat6 cable, which is easier to route through walls, ceilings, furniture, and conduit. The Atlona AT-OME-TX11-WP is designed for exactly that kind of application. It extends HDMI up to 330 feet while maintaining 4K/UHD support at 60 Hz in 4:2:0 and HDCP 2.2 compliance. It also supports remote power over HDBaseT, which can reduce the need for a local power outlet at the wallplate location. That said, HDBaseT is not automatically better for every setup. It requires a compatible receiver on the far end, so it is best for integrated AV systems rather than simple direct device connections. Choose HDMI for short, straightforward runs. Choose HDBaseT when distance, infrastructure, and professional installation quality are the priority.
An HDBaseT transmitter sends the signal, and an HDBaseT receiver accepts it at the far end. In a typical system, the transmitter connects to the source device, such as a laptop, media player, or switcher, and the receiver connects to the display, projector, or AV system. The Atlona AT-OME-TX11-WP is the transmitter side of that link. It is a wallplate-style HDMI input device that takes a local HDMI signal and sends it over one category cable for up to 330 feet. To complete the system, it must be paired with a compatible HDBaseT receiver or receiving display. This matters when planning a room system because a transmitter alone will not display video. Buyers who need a clean wall connection point for users at a table, lectern, or wall location benefit most from this style of transmitter. If your source equipment is already in a rack and your display is remote, you may need both transmitter and receiver hardware chosen as a matched solution.
A wallplate HDBaseT transmitter is best for spaces where users need a simple, fixed HDMI connection point built into the room. That includes conference rooms, classrooms, huddle spaces, training rooms, and presentation areas where laptops are frequently plugged in by different users. The Atlona AT-OME-TX11-WP fits into a standard US one-gang opening, so it creates a clean, permanent connection point instead of leaving cables loose on a table or hanging from a wall. It also includes black and white trim kits, which helps it blend into different interiors. Because it is remotely powered over HDBaseT, installation can be simpler in places where adding local AC power is inconvenient. A tabletop extender may be better if room layouts change often or if portability is important. A rackmount unit may make more sense when all sources are centralized in an AV rack. Choose a wallplate model when ease of use, neat appearance, and fixed in-room access are the main goals.
With this type of HDBaseT transmitter, a 4K HDMI signal can be extended up to 330 feet, or 100 meters, over a single category cable. The Atlona AT-OME-TX11-WP is specified for 4K/UHD at 60 Hz with 4:2:0 chroma support, which is a common format for commercial AV distribution. That distance is one of the main reasons buyers choose HDBaseT over direct HDMI cabling. It allows AV integrators and facility managers to route a signal from a convenient wall input point to a remote display, projector, switcher, or receiver without relying on bulky long-run HDMI cables. The practical result depends on proper installation, quality cable, and compatibility with the receiving device. For best results, this is most appropriate for structured cabling environments in offices, schools, and presentation spaces. If you need a temporary connection or only a short run, HDBaseT may be more infrastructure than necessary, but for longer professional runs it is a strong fit.
Yes, this wallplate transmitter supports 4K/UHD video at 60 Hz in 4:2:0 and is HDCP 2.2 compliant. That means it is designed to handle modern high-resolution video signals as well as protected content used by many commercial and consumer sources. For buyers, HDCP 2.2 support is important because it helps avoid compatibility problems when connecting newer laptops, media players, and content sources to displays or projectors through an AV system. Without the right HDCP support, a system may pass no image or show errors with protected material. The main consideration is making sure the rest of the signal chain also supports the required formats. A transmitter can only do part of the job. The receiver, switcher, display, or projector also needs to be compatible with the same resolution and content protection standards. This model is best for professional environments where dependable 4K distribution and compliance with current AV requirements are necessary.
Yes, this transmitter supports remote power over HDBaseT, so it can be installed without a local AC outlet at the wallplate location if the connected system is set up to provide that power. This is especially useful for in-wall or furniture installations where adding electrical service would increase complexity or cost. The Atlona AT-OME-TX11-WP is designed for clean professional integration, and remote power helps preserve that by reducing visible hardware and simplifying placement. In meeting rooms and classrooms, that can make a wall input plate much easier to deploy behind lecterns, inside floor boxes, or in finished walls. The key tradeoff is that the matching receiver or connected HDBaseT infrastructure must support the appropriate remote powering arrangement. Installers should confirm compatibility before deployment. For permanent AV installations where neatness and efficient wiring matter, remote power is a major benefit. For temporary setups or systems using unrelated equipment, a locally powered solution may sometimes be easier to coordinate.
This transmitter is best suited for conference rooms, classrooms, training rooms, collaboration spaces, and other presentation environments where users need a dependable in-room HDMI connection point. It is especially useful when the display, projector, or AV rack is located far from the source connection. The Atlona AT-OME-TX11-WP combines a wall-mounted HDMI input with HDBaseT extension up to 330 feet, which makes it practical for modern spaces that want a professional finish and simple user experience. Because it fits a US one-gang opening and includes interchangeable black and white trim kits, it can integrate neatly into finished interiors without looking like temporary AV gear. It is less ideal for casual home use or portable events where the installation needs to move frequently. This product is most valuable in fixed commercial or educational systems where reliability, appearance, and structured cabling are more important than mobility. Buyers planning a permanent room solution will benefit most from this form factor.
Before buying an HDBaseT transmitter, check five things: source connection type, required resolution, cable distance, receiver compatibility, and installation style. Those factors determine whether the product will fit the room and the system design. For example, the Atlona AT-OME-TX11-WP is a good match if your source is HDMI, you need up to 4K/UHD at 60 Hz in 4:2:0, and your signal path needs to reach as far as 330 feet over Cat5e or Cat6. It is also designed as a one-gang wallplate, so it is ideal when you want a built-in user connection point rather than a freestanding box. HDCP 2.2 support is another important check if you expect protected content. You should also verify power requirements and make sure the receiving hardware supports the same HDBaseT and video standards. If you need USB, control features, or a different connector type, another model may be more appropriate. The best choice depends on the room workflow, not just the signal distance.
Yes, this is a strong choice when the goal is a clean, professional wall-mounted HDMI input for a commercial AV system. The Atlona AT-OME-TX11-WP is built as a US one-gang wallplate, so it installs like a permanent room infrastructure component rather than an external adapter or extender box. That matters in commercial spaces because appearance and usability often matter as much as signal performance. Users get a clear, familiar HDMI input at the wall, while the AV system can send that signal up to 330 feet over category cable to a remote receiver. The included black and white trim kits also help the unit match the room finish more naturally. The main limitation is that it is designed for structured installation, not quick portable use. It also requires a compatible HDBaseT receiving endpoint to function as intended. For organizations outfitting conference rooms, teaching spaces, or presentation areas where a polished built-in connection matters, this style of transmitter is often the preferred option.

The Atlona AT-OME-TX11-WP delivers professional-grade 4K video distribution through a sleek wallplate design. This HDBaseT transmitter extends pristine HDMI signals up to 330 feet over standard Cat5e/6 cabling, eliminating the need for expensive proprietary cables. Perfect for conference rooms, classrooms, and corporate installations, it seamlessly integrates into any wall while maintaining full 4K resolution and color depth. The included trim ring ensures a polished, finished appearance that complements modern interiors. Ideal for AV professionals seeking reliable, scalable signal extension without compromising image quality.

This HDBaseT transmitter delivers high-performance HDMI video extension up to 330 feet over a single category cable. Designed for modern collaboration spaces, it supports 4K/UHD resolution at 60 Hz with HDCP 2.2 compliance for secure content delivery. The compact one-gang US enclosure fits seamlessly into standard wall openings for a clean, professional finish. It comes with interchangeable black and white trim kits to match any interior decor effortlessly. Remote power capability eliminates the need for local AC outlets, simplifying installation behind walls or in furniture. This versatile unit is ideal for providing localized AV access in meeting rooms and open presentation areas. Its refined styling ensures it blends perfectly with existing wallplate outlets. Reliable signal transmission is guaranteed for all professional AV integration needs.

Input HDMI
Resolution 4K/UHD @ 60 Hz (4:2:0)
Extension Distance 330 feet (100 meters)
Compliance HDCP 2.2
Enclosure US One-Gang
Power Remote Powered over HDBaseT
Included Accessories Interchangeable Black and White Trim Kits
Connectivity HDBaseT

Customer reviews

Poor
Good

Max 4096 symbols

Accepts .jpg, .png and .webp (10Mb max size)

Be the first to write a review

No reviews yet

No reviews match the selected filter.

Customer reviews

Poor
Good

Max 4096 symbols

Accepts .jpg, .png and .webp (10Mb max size)

Be the first to write a review

No reviews yet

No reviews match the selected filter.